FEATURES
Car Rear View Monitor
Easy to install and use
High resolution display
Low power consumption
Supports screen rotatable
No audio and input or output
Full color LED backlight display
Stick on your car firmly and stablely
4.3” LED Backlight Color TFT LCD monitor
It helps to avoid incidents and accidents abrasion well
Support Car DVD, VCD, GPS, camera, STB, satellite receiver, and other video equipment.
Park rear view priority: The monitor will start up automatically, and synchronous display the video from rear view camera when you are backing your car, the monitor will close itself after backing.

Car Rear View Camera
Anti fog glass.
CMOS imaging sensor.
Support NTSC video system.
Snap-in design, it is easy to install.
Embedded mounting in rear bumper.
High sensitivity and low power consumption.
High-definition and 120 degree wide viewing angle.
Water-proof, shock-proof and anti-jamming functions.
It helps to avoid incidents and accidents abrasion well.
Its simple and modest design and small size won´t draw any attention.
This camera can give you a full sight of the back of your car when you are driving.
To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours.
Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle hat has no rear-view mirror or poor rear vision.
Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed.

Specifications
Car Rear View Camera
Lens 2.0cm
Color Black
TV System NTSC
S/N Ratio >48dB
Water-proof IP66
Power DC 12V±10%
White Balance Auto
Camera Size (0.87 x 0.83)" / (2.2 x 2.1)cm (L x W)
Sync. System Internal
Video Cable Length 236.22" / 6.0m
Video Output 1.0Vpp, 75Ohm
Length Angle 120 Degree
Cable Length of Camera 23.23" / 59cm
Scanning System 2:1 Interlace
Power Supply Cable Length 16.14" / 41cm
Image Reverse Left-right Mirror
High Grade of Waterproofing IP66
Horizontal Resolution 420 TV Lines
Effective Pixels NTSC: 510(H) * 492(V)
Current Consumption No More Than 300mA
Image Sensor CMOS 1/4 MT9V125 or PC1030, Color
Minimum Illumination 0.2 Lux/ F1.8(0 Lux with LED)
Storage Temperature -30℃ ~ 60℃, 95% RH Maximum
Operating Temperature -20℃ ~60℃, 95% RH Maximum
Electronic Shutter 1/50 to 1/100,000 Seconds, 1/60 to 1/100,000 Seconds
Car Rear View Monitor
Housing Material ABS
Aspect Ration 4:3
Screen Size 4.3 inch
Resolution 480x272
Power supply DC 9V-36V
Video input One way video input
Display Component Color TFT LCD
Weight 17.64oz / 500g
Dimensions (8.66 x 8.27 x 1.97)" / (22 x 21 x 5)cm (L x W x H)
Package Includes
1 x Video Cable
1 x Power Cable
1 x Installation of Visual Reversing
1 x Car Rear View Camera
2 x Screws
Extra Info
Installation:
1. Mount the camera inside the keyhole of your vehicle.
2. Adjust the lens of the camera to its best position.
3. Voltage can not exceed 11v.
4. Connect the video output of the camera to the display in your vehicle.